Linear actuators

 Tracking system for solar cells
Tracking systems adjust solar cells to the current position of the sun. Depending on the location, the tracking system can increase the efficiency of the cell by up to 40 % compared with stationary systems. This HANNING system is suitable for two-axis programmable tracking and solar modules up to 40 m². The HANNING tracking systems consists of a low-profile gearbox, tilting drive and controle unit. Read more: download PDF.
 Frequency inverter DC-FI
This low-voltage frequency inverter is developed for controlling three-phase asynchronous motors and can be used with any HANNING linear actuator, lifting column and low-profile gearbox with low-voltage three-phase winding. Acceleration and brake response are freely programmable, manual speed control, thermal monitoring of motor and inverter, switching frequency 8 or 16 kHz. Read more: download PDF.
 Lifting columns
The HANNING lifting column, designed to steplessly lift and lower cantilevered and heavy loads. The powerful telescopic drive enables a lifting torque of up to 7.000 N and traversing speeds of up to 32 mm/s. There are 2- and 3 pieces column lifts available offering different lifting heights. Tip-resistant through large cross-section and precise guidance. Aesthetic design. Designed according to DIN EN 60601, UL/CSA 60601. Read more: download PDF.
 Linear actuator SL95
The range of HANNING encapsulated actuators headed by the SL95. It enables pressure and tension up to 12.000 N and traversing speeds up to 42 mm/s or 50 mm/s. Controlled by either the patented HANNING pneumatic control or electrically. Available with declutch system, different built-in sizes and stroke lengths or as low-voltage three-phase AC system with frequency inverter DC-FI. Read more: download PDF.
 Linear actuator SL80
The new SL80 is very powerful and covers up to 8.000 N. The rugged motors enable almost a load-constant speed up to     15 mm/s. The compact design was reached by the new developed housing with integrated end shield. The SL80 is also suitable for smaller mounting spaces. Available with declutch system, different built-in sizes and stroke lengths or as low-voltage three-phase AC system with frequency inverter DC-FI. Read more: download PDF.
 Linear actuator KL95
The KL95 is the smallest linear actuator of the encapsulated series. It is available for applications up to 4.000 N. Control by HANNING patented pneumatically- or electrically control units (electrical only through SL95 – SL80 Master). Available with declutch system, different built-in sizes and stroke lengths or as low-voltages three-phase AC system with frequency inverter DC-FI. Read more: download PDF.
 Vibrations motors
Hanning vibration motors are used in therapy- and treatment tables, in beds and in massage- and cosmetic chairs. In these applications they support therapeutic treatment with different vibration levels and types to relax the muscles. The vibrations motors are also available as set, comprising three motors, one vibration control and a pneumatic handheld control switch. There are various designs to choose from. Read more: download PDF.
 Linear actuator S95 / SH95
The very compact designed linear actuators S95 / SH95 are available as single-phase 230 V or three-phase 400 V. The powerful single-phase or three-phase AC motors with a winding diameter of 95 mm, provide large traversing speeds even under load changes. The linear actuators are also available as low-voltages three-phase AC system with frequency inverter DC-FI. Read more: download PDF.
 Linear actuator S80 / SH80
The compact linear actuators S80 / SH80 are available as single-phase devices with 230 V. Powerful AC motors with a winding diameter of 80 mm provide large traversing forces. Depending on the application, the linear actuator can get a prefered direction for the largest possible efficiency. The linear actuators are also available as low-voltages three-phase AC system with frequency inverter DC-FI. Read more: download PDF.
 Linear actuator S71 / SH71
Linear actuators S71 and SH71 are available as single-phase devices with 230V. A winding diameter of 71 mm provides the compactness required for many applications. The spindles and winding characteristics of S71 and SH71 can be perfectly adapted to the individual application. The linear actuators are also available as low-voltages three-phase AC system with frequency inverter DC-FI. Read more: download PDF.
 Linear actuator S56 / SH56
Linear actuators S56 and SH56 are available as single-phase devices with 230V. With a winding diameter of 56 mm they are the smallest of the HANNING linear actuators. It is possible to adapt the windings, spindles and prefered direction of rotation of S56 and SH56 linear actuators to you specific application. The linear actuators are also available as low-voltages three-phase AC system with frequency inverter DC-FI. Read more: download PDF.
 Linear actuator SI95 / SHI95
HANNING linear actuators SI95 with screw nuts and SHI95 with encapsulated screw types, designed for industrial applications. With their forces up to 12.000 N they are especially suitable for applications such as moving ramps, loading-platforms or conveyor belts. Suitable for duty times up to 50%. Housing with integrated ventilation, type of protection IP54, rugged TR20 elevating spindle. Mechanically secured endpositions. Read more: download PDF.
 Hamatic Motorised beds
For more than 30 years, HANNING manufactures hamatic frames for adjustable electric beds. The development of hamatic has been continuously improved. Extremely rugged aluminium frames in variable length- and width. The high-quality spring battens perfectly adjust to the body and give flexible support for all common mattress types. Slip clutches ensure highest safety and reliability. Read more: download PDF.